3+ Equipment maintenance Jobs in Bangalore (Bengaluru) | Equipment maintenance Job openings in Bangalore (Bengaluru)

Job Role: Technical Service Engineer.

Type: Permanent/Fulltime

Location: Hyderabad/Bengaluru/Chennai

Requirement: Immediate joining.

Job Description:

Key Responsibilities

·      Installation & Commissioning: Set up printers, MFP’s, POS (Point of Sale) machine, IP and analog cameras, DVRs/NVRs, wire low-voltage circuits, install control panels, motion sensors, and electronic locking hardware and associated hardware (mounts, housing, and power supplies) at project sites.

·      Network Integration: Configure printers, MFP’s, POS (Point of Sale) machine, IP addressing, Connect IP cameras to networks, configure PoE switches, routing, switching, port forwarding, and remote access setups so clients can monitor feeds off-site.

·      Testing & Troubleshooting: Conduct system health checks, diagnose connectivity or hardware failures, and repair/replace faulty cables, cartridge, cameras, servers or backup batteries.

·      Cabling & Infrastructure: Lay and terminate CAT6, fiber optics, and power cables according to industry safety standards.

·      Preventive Maintenance: Conduct scheduled service visits to clean equipment, test alarm triggers, and perform software updates.

·      Client Support & Training: Understand customer needs, conduct site surveys, and train end-users on how to operate security panels, mobile applications, and monitoring systems, back up, and retrieve footage.

·      Documentation: Maintain accurate service logs, test results, and as-built drawings for site handovers.

Core Requirements

·      Education: ITI, Diploma, B.E., or B.Tech. in Electronics, Electrical, or IT Engineering or any bachelor degree.

·      Experience: Min. 6 months of experience in security surveillance and fire safety systems, printer service, POS( Point of Sale) machine service or as network engineer in relevant field.

·      Technical Skills: Deep understanding of TCP/IP, DNS, DHCP, CCTV software (VMS), and hardware components.

·      Knowledge of Brands: Familiarity with industry-leading surveillance and ELV (Extra Low Voltage) systems like Hikvision, Dahua, Bosch, and Honeywell.

·      Soft Skills: Strong problem-solving abilities and clear customer communication.

·      Physical & Environmental Aptitude: Ability to work comfortably at heights, in varying weather, and across multiple physical client sites and a valid driver's license for field travel.

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Position Summary:

We are seeking a detail-oriented and experienced Quality Control person to join our team, a

designer and manufacturer of high performance elastomeric seals. The primary responsibility of

this role is to ensure the quality of incoming and outgoing materials, as well as inspect in-process

plastic and metal components to maintain the highest product standards.

Key Responsibilities:

1. Incoming and Outgoing Material Inspection:

- Inspect and verify the quality of raw materials, elastomers, plastics, and metal components.

- Compare incoming materials to specifications, purchase orders, and certifications.

- Prepare and maintain detailed records of material inspections and test results.

2. In-Process Inspection:

- Monitor production processes to ensure compliance with quality standards.

- Conduct dimensional and visual inspections of plastic and metal components during

manufacturing.

- Identify and report non-conformities and initiate corrective actions.

3. Final Product Inspection:

- Conduct detailed inspections of finished elastomeric seals and other components before

shipment.

- Verify compliance with customer specifications and regulatory requirements.

4. Documentation and Reporting:

- Maintain detailed inspection records, test reports, and calibration logs.

- Prepare and submit quality reports to the Quality Manager and production team.

5. Collaboration and Continuous Improvement:

- Work closely with production, engineering, and purchasing teams to address quality issues.

- Assist in root cause analysis and corrective action plans for identified defects.

- Participate in continuous improvement initiatives to enhance product quality and process

efficiency.

6. Equipment Maintenance and Calibration:

- Ensure inspection tools and equipment are calibrated and in good working condition.

- Schedule regular maintenance and calibration of measurement devices.

Qualifications and Skills:

- Education: A Bachelor’s degree in Science (preferably Physics) or a B.E Degree (Mechanical /

Industrial) or a related field is preferred.

- Experience: Minimum 1-2 years of experience in quality control, preferably in the elastomeric

seals, plastics industry.

Technical Skills:

- Proficiency in using inspection tools such as calipers, micrometers, CMMs, and gauges.

- Strong understanding of technical drawings, specifications, and GD&T.

- Familiarity with ISO 9001 and other quality management systems.

Soft Skills:

- Strong attention to detail and analytical skills.

- Excellent communication and documentation abilities in English is a must.

- Proficiency in Microsoft Excel, Powerpoint and Word.

- Ability to work independently and as part of a team in a fast-paced environment.

- Knowledge of Lean Six Sigma and 5S is preferred.