11+ Nexpose Jobs in India

Job description:

1. 7-12 Yrs of experience in Vulnerability,

2. Mandatory to have minimum 3 yrs of experience on Rapid 7 and Insight VM/Nexpose ,

3. Linux or Windows platform experience would be an added advantage

Interested in designing award-winning wearables while managing challenging constraints so that your products are used everyday by millions of users? Then read on..

ULTRAHUMAN • HARDWARE

Hardware Design Engineer Wearables

Bangalore (Kudlu Gate)| • On-site | Full-time |

ABOUT THE ROLE

Ultrahuman's Hardware division builds award-winning wearables the Ultrahuman Ring and Ring Air pushing consumer technology in health and metabolic fitness. We're looking for a Hardware Design Engineer to own electronics design for our next-generation smart rings, from architecture and schematic capture through PCB layout, bring-up, and mass production.

This is a hands-on role at the extremes of miniaturization and power efficiency. You'll make architecture-level component decisions, drive high-density and RF layout, and take designs through NPI to volume — working closely with mechanical, firmware, and manufacturing teams on fast product cycles.

KEY RESPONSIBILITIES

Architecture & Schematic Design

• Translate product requirements into hardware architecture, then into schematics and manufacturable PCB designs using OrCAD / Allegro (Cadence).
• Own component selection across MCU/SoC, PMIC, sensor AFEs, and RF front-ends — balancing size, power, cost, and supply availability.
• Handle schematic-to-layout conversion and netlist import; create and maintain symbol/footprint libraries and land patterns.

High-Density & RF Layout

• Design and review high-density (HDI), rigid, and rigid-flex PCB layouts for space-constrained wearable form factors.
• Design 2.4 GHz BLE antennas and NFC coils, matching networks, and controlled-impedance routing; support antenna tuning and RF validation.
• Apply signal-integrity best practices for high-speed digital interfaces and mixed-signal boards.

Power & Low-Power Design

• Architect power trees around PMICs, buck/boost converters, and LDOs, including Li-ion charging for small-capacity cells.
• Build and validate ultra-low-power current budgets to meet multi-day battery-life targets.
• Strong grasp of power electronics and active/passive component behaviour.

Sensor Integration

• Integrate optical biosensing (PPG) AFEs, IMUs, temperature sensors, and haptics; own I²C/SPI interface design and analog front-end layout.

Manufacturing & DFM

• Own Gerber/ODB++ release, fabrication and assembly drawings, panelization, and full manufacturing data packages.
• Prepare and maintain BOMs; evaluate and qualify alternate / second-source components.
• Drive DFM/DFA reviews with fab and SMT/EMS partners; support NPI through EVT/DVT/PVT to mass production.
• Sound understanding of PCB materials, stackups, and component assembly processes.

Compliance, Reliability & Validation

• Apply EMI/EMC, thermal, and mechanical design best practices.
• Support pre-compliance and certification across FCC, CE, BIS, and RoHS, and familiarity with IEC standards for PCB design safety.
• Coordinate with test engineers on board bring-up and PCB validation; run circuit simulations for RF and signal/timing optimization.

Ownership & Collaboration

• Independently manage hardware projects end-to-end, including vendor coordination and delivery of final hardware.
• Collaborate with mechanical engineers to optimize designs and meet project timelines.
• Bring the latest design tools, methodologies, and industry best practices into the team.

REQUIRED QUALIFICATIONS

• Bachelor's or Master's in EEE, Electronics, or equivalent practical experience.
• 4+ years of hands-on hardware / PCB design experience, ideally in consumer electronics or wearables.
• Proficiency with a leading schematic and PCB toolchain (OrCAD / Allegro preferred).
• Proven track record taking a product from schematic through layout to volume production.
• Working knowledge of power electronics and active/passive component selection.
• Familiarity with global certifications (FCC, CE, BIS, RoHS) and IEC PCB safety standards.

PREFERRED / BONUS

• Experience with miniaturized high-density or rigid-flex designs.
• RF design experience (2.4 GHz / BLE, NFC, antenna tuning and matching).
• EMI/EMC design and pre-compliance testing experience.
• Low-power / battery-operated wearable product experience.
• Familiarity with reliability methods (DFMEA, derating) and RF / signal-timing circuit simulation.

The Role:

We are seeking a highly skilled Sr Embedded Software Engineer (Python & C++) to manage and improve the software development lifecycle for device firmware systems. The primary focus of this role is to ensure firmware operational reliability, fail-safe implementation, certification compliance, and robust production deployment.

This role is ideal for an engineer experienced in system-level software, firmware validation, testing automation, and production readiness — but not focused on low-level hardware design.

Experience: 6-10 years

Job Location: Hyderabad

Job Type: Permanent

CORE FOCUS AREAS

• Ensure firmware operates reliably in production environments

• Implement and validate fail-safe mechanisms and fallback logic

• Maintain certification compliance across firmware releases

• Drive robust, repeatable production deployment pipelines

• Support field debugging and OTA update validation

IDEAL CANDIDATE PROFILE

• Strong hands-on experience in Python and C++ development

• Background in system-level software and firmware validation

• Experience with testing automation and production readiness

• Comfortable working closely with embedded engineers

• Not required to have low-level hardware design expertise

KEY RESPONSIBILITIES

FIRMWARE OPERATIONAL STABILITY

• Ensure firmware operates reliably in production environments

• Implement and validate fail-safe mechanisms and fallback logic

• Monitor watchdog systems, timeout handling & safe state transitions

• Work closely with embedded engineers to validate firmware behavior

PYTHON & C++ DEVELOPMENT

• Develop firmware communication layers & device control applications

• Build diagnostic tools and test automation frameworks

• Optimize performance and memory handling in C++ applications

• Develop production-ready Python tools for deployment, logging & validation

FAIL-SAFE & SAFETY IMPLEMENTATION

• Implement safe boot validation, error recovery & redundancy logic

• Build communication retry systems & safe shutdown protocols

• Design state machines for controlled device operation

• Ensure safe-state transitions on power, comms or hardware failure

PRODUCTION DEPLOYMENT & VALIDATION

• Create secure and repeatable firmware deployment pipelines

• Implement boot image validation, signature verification & rollback

• Develop health monitoring and diagnostic utilities & CI/CD Pipelines

• Support field debugging and OTA update validation

Linux Environment

• Work in Linux-based environments for firmware development, debugging, and deployment — including shell scripting, process/service management, and system diagnostics.

• Own unit testing, integration testing & production release management

• Ensure code quality and compliance with internal standards

IoT + AI

Building the tech behind India's Reverse Vending Machines

SUCCESS METRICS

• Firmware reliability — stable, uninterrupted operation in production environments

• Fail-safe coverage — validated fallback logic, redundancy & safe-state transitions

• Linux Environment - Use Linux for development till deployment

• Deployment success rate — secure, repeatable pipelines with clean rollbacks

• Code & release quality — test coverage, code review discipline & CI/CD health

• Field performance — OTA update success and turnaround on field debugging

Requirements:

• Very good programming knowledge in C/C++
• Experience in Multi-threaded software development
• Understanding of operating systems concepts, system performance, and optimization
• Familiar with working in an Embedded Linux development environment.
• Excellent problem-solving/debugging skills, design, development, troubleshooting, and debugging
• Knowledge of embedded tools like emulators, linkers, makefiles, etc
• Experience in voice applications development, preferably on client/server platforms
• Knowledge of RTOS programming will be added advantage.
• Understanding of different processors. microcontrollers architectures.
• Familiarity with development tools such as GCC, GDB, Eclipse, GNU Make, etc

Hello,

We are hiring SAP UI5 Developer with BTP experience for our client at Bangalore and Pune.

Roles and Responsibilities as follows:-

Experience – 4 to 8 years

Notice: Immediate to 7 days

Location – Pune or Bangalore

Must have willingness to travel to Pune office whenever needed.

Contract – is preferred or Fulltime is also ok.

Must Have

• Over 4 years of experience in working with SAPUI5

• Hands on experience and a good understanding in HTML, CSS and JavaScript

• Good Understanding of SAPUI5 framework and architecture

• End to end hand-on of SAP BTP Platform (SAP CF Service Offerings like, Destination, Portal/Launchpad, Object Store, Connectivity, Workflows. Etc).

• Experience in developing SAPUI5 application using ODATA service endpoint

. Experience in Standard and Custom SAP Fiori Applications

• Experience in Custom controls in SAP UI5 and Integration of 3rd party controls

• Experience in Application deployment on ABAP repo/ SAP CP

• Experience in Fiori Launchpad Portal configurations and application deployment.

Good to Have

• Experience in developing SAPUI5 application using Rest Web services endpoints

• Experience in ABAP OData services

• Experience in SAP HANA, SAP CP, SAP Cloud Foundry

• Experience in SAP CP Business Application using CDS

• Experience in SAP Multi Target Application

• Experience in Launchpad Theme Designing

Responsibilities:

·        Collaborate with cross-functional teams, including hardware engineers, system architects, and product managers, to define software requirements and specifications for embedded systems.

·        Design and develop efficient, reliable, and scalable embedded software solutions that meet the defined requirements.

·        Write, test, and debug code in programming languages commonly used for embedded systems, such as C, C++, and assembly language.

·        Interface with hardware components, such as sensors, actuators, microcontrollers, and communication interfaces (UART, SPI, I2C,CAN etc.).

·        Develop and implement device drivers, firmware, and low-level software to control hardware peripherals.

·        Participate in code reviews to ensure code quality, maintainability, and adherence to coding standards.

·        Perform unit testing, integration testing, and system testing of the embedded software.

·        Analyse and optimize system performance, memory usage, and power consumption.

·        Collaborate with the quality assurance team to identify and resolve software defects.

·        Stay up-to-date with industry trends, tools, and technologies related to embedded systems and software development.

·        Document software design, code, and test procedures for internal and external use.

·        Provide technical support to other teams during product integration, testing, and deployment.

Qualifications:

·        Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, or a related field.

·        Proven experience in embedded software development, including designing, coding, testing, and debugging.

·        Proficiency in programming languages such as C and C++.

·        Familiarity with Embedded C, 32-bit microcontroller,16-bit microcontroller hardware interfaces.

·        Knowledge of real-time operating systems (RTOS) and multi-threaded programming.

·        Strong problem-solving skills and ability to troubleshoot complex hardware-software interactions.

·        Excellent communication skills and the ability to work effectively in a team.

·        Familiarity with communication protocols (UART, SPI, I2C, CAN, Ethernet) is desirable.

·        Knowledge of security considerations in embedded systems is an advantage.

Location: Chennai

Strong in Basic C++, STL, Linux

OOPs, Exception Handling

Design Pattern and Solid principles, concepts related to UML representation

•           Solution, design, and architecture concepts

•           Knowledge on Pointers and smart Pointers.

•           IO streams, Files and Streams and Lambda Expressions in C++ added advantage.

•           Features of C++17 and usage of STL in C++ is added advantage.

•           Templates in C++.

Communication skill, Attitude, learnability

• 3-7 years of experience in development of Algorithm & Functions for advance driver assist systems (ADAS), Autonomous driving (AD)
• Experienced in development using MATLAB Simulink, TargetLink, Stateflow
• Design and development of automotive feature/function software/components (ACC, AEB, TSR, LKA etc.) for ADAS/AD systems
• Coordination and regular interaction with different stakeholders and teams like testing, requirements, leads etc.
• Participate in SW requirement generation, SW architecture, detailed design etc

Role: Functions Developer (Embedded c - Algorithm / Driving Functions Development)

Location: Hyderabad

Fulltime

Job Description:

• Design and development of automotive feature/function software/components (ACC, AEB, TSR, LKA etc.) for ADAS/AD systems
• Coordination and regular interaction with different stakeholders and teams like testing, requirements, leads etc.
• Participate in SW requirement generation, SW architecture, detailed design etc.

Requirement:

• 3-7 years of experience in development of Algorithm & Functions for advance driver assist systems (ADAS), Autonomous driving (AD)
• Development experience with safety critical systems
• Experienced in development using MATLAB Simulink, TargetLink, Stateflow
• Experience in modelling and validation of control systems
• Knowledge of SIL, Performance Test, Functional testing
• Embedded software development using C, C++
• Issue management and version control
• Knowledge of ASPICE processes, Static analysis, MISRA checks etc.
• Strong written and verbal communication skills
• Proactive approach for problem solving

Good to have:

• Knowledge of ADAS/AD functions (ACC, TSR, AEB, LCA etc), Data Analysis
• Experienced in managing and authoring of function specification requirements
• Familiarity with AUTOSAR RTE

Nice to have:

• AUTOSAR, Functional Safety (ISO26262) exposure
• Scripting Knowledge - Python, MATLAB
• Working knowledge of automotive protocols like CAN, Ethernet etc.

Thanks,
Satish,

Summary:

The embedded systems engineer designs, develops, tests, and maintains embedded systems. The engineer will identify and fix issues and work collaboratively with engineers, product managers, and others on various teams. 

Responsibilities:

• Design and build embedded systems, including embedded system firmware
• Test and debug the systems
• Monitor and maintain the system after development
• Improve system efficiency and stability after development
• Collaborate with customers to create systems based on their needs

Requirements:

• Minimum of a bachelor's degree in computer science or engineering
• Professional experience in embedded systems
• Significant programming experience in C or C++
• Experience in trouble-shooting embedded systems and microcontroller peripherals
• Experience in working in real-time operating systems
• Experience in interfaces, IP protocols, and hardware subsystems
• Proficiency in working with common embedded systems communication protocols
• Strong interpersonal and writing skills
• Ability to work as part of a team
• Exceptional analytical and problem-solving skills
• Self-motivated and passionate about your work and embedded systems
• Always eager to learn and improve